250 lm on drum - Calorique MSLL - heating cable self-regulating 16 W/m - pipe trace heating - for Indoor and Outdoor use

250 lm on drum - Calorique MSLL - heating cable self-regulating 16 W/m - pipe trace heating - for Indoor and Outdoor use

SKU: 7502
GTIN: 785983127462
Category: Self-regulating heating cable - sold by the meter

Calorique Self-regulating heating cable MSLL 16 W/m to protect against frost damage and maintain the temperature of pipelines and tanks.

899,90 €

incl. 19% VAT , plus (Standard)

Currently out of stock

Description
Notify me when this item is available

250 lm on drum - Calorique LTC heating cable self-regulating 16-30W/m high quality outer jacket for indoor and outdoor use

Self-regulating LTC heating cable is the simplest solution for use on smaller objects where large heating areas or long heating sections are not required. This heating cable can be optimally used against icing of gutters and roofs of buildings and structures, as well as frost protection and temperature control of pipelines during the cold season.

The heating cable has IP protection class 67 and is therefore suitable for temporary submersion in water up to a depth of max. 1m for max. 30 minutes. Permanent use under water is expressly prohibited for this product for safety reasons.

Indoor and Outdoor use:

gutters
Frost-free operation of photovoltaic modules
Pipe trace heating
Optimal solution against condensation
Repair of cold and thermal bridges
Temperature control for smaller reservoirs, containers or tanks.

For de-icing large open areas outdoors and for heating the concrete foundation or screed, we recommend using a different product. In this regard, please contact our customer service. We will be happy to help you.

Advantages:

Self-regulating, no additional thermostat required
Easy installation
Available either by the meter or cut to the required length and ready to plug in
An overlap with itself is possible if necessary
Overheating impossible
Moisture and weather resistant
UV radiation resistant

The heating circuit length is calculated by taking into account of the following data:

Rated voltage 230 watt
Automatic circuit breaker type C with maximum load of 85%
Maximum voltage drop of 10% on the supply conductor of the heating cable
One-sided connection of the heating cable. The cable is set up on metal pipes with subsequent thermal insulation. Inrush current changes according to the start temperature

When the heating cable is cold started, a current jump occurs which can be 6-8 times higher than nominal value - this is normal and can last several seconds.
Within 4-6 minutes the current reaches the calculated value according to the operating temperature.

Important!

When planning roof deicing systems, it must be taken into account that the calculated specific power of the cable in dew water is up to 2x higher and may deviate from the data sheet.

Voltage:	220 / 240 VAC
Dimensions:	11x5 mm
Conductor cross-section:	0,94 mm²
Maximum Operating Temperature:	+85° C
UV-tolerance:	Not
Use in potentially explosive areas:	no
Specific Power Consumption (at 10°C):	16 W/m
Minimal Bending Radius:	35mm
Certification:	CE, TÜV Nord
Maximum ambient temperature:	+85°C
Minimum installation temperature:	-15°C
IP protection class:	IP 67
Warranty / lifetime:	15 years / min. 30 years
Maximum operating temperature with voltage / without voltage:	+65°C / +85°C

Contact data

E-Mail