250 lm on drum - Calorique HTM - heating cable self-regulating 10W/m - trace heating in and on the pipe

250 lm on drum - Calorique HTM - heating cable self-regulating 10W/m - trace heating in and on the pipe

SKU: 7501
GTIN: 0618119251826
Category: Self-regulating heating cable - sold by the meter
Manufacturers: Calorique

Self-regulating HTM - heating cable is the simplest solution for heating the small diameter pipelines. The HTM heating cable can be used in aggressive and organic environment.

1.499,99 €

incl. 19% VAT , plus (Standard)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

Calorique HTM self-regulating heating cable with jacket 10W/m to protect against frost damage to water pipes, drinking water pipes. Pipe trace heating.

Self-regulating HTM heating cableis the simplest solution for heating the small diameter pipelines. This heating cable is optimal for all types of water pipes, including drinking water pipes, because the cable has slim dimensions of about 7.7 x 5.5 mm and is flattened. The HTM heating cable is suitable not only for metal but also for plastic pipes. The self-regulating heating cable can be installed outside and inside the drinking water pipes.

Indoor and Outdoor use:

Pipelines with different diameter
Suitable for metal and plastic pipes
Can be installed in and on the pipe

The heating cable has a thermoplastic fluoropolymer outer jacket with the underlying protective mesh of tinned copper wires and offers high chemical resistance. The HTM heating cable can be used in aggressive and organic environments. According to the manufacturer, safe use is allowed in the potentially explosive atmospheres.

ENERGY SAVING: the heating cable is self-regulating and does not require an additional thermostat. It automatically reacts to fluctuations from the surrounding temperature and compensates them: in colder places is heated more, in warmer less
APPLICATION OPTIONS: perfectly applicable to the pipelines with small diameter. The heating cable fits all types of water pipes, including drinking water pipes, metal and plastic pipes
HIGH QUALITY INSULATION: Our self-regulating heating cable has a quality sheathing with continuous copper mesh underneath and is permanently moisture, weather and UV radiation resistant
EASY INSTALLATION: the uninterrupted parallel layout of the cable allows cutting during the installation process
HIGH QUALITY AT AN UNBEATABLE PRICE: When purchasing our self-regulating heating cable, our customers get 15 years manufacturer warranty and can be used with at least 30 years of carefree maintenance-free use by using high quality product

The heating cable consists of two parallel copper wires. The copper wires are separated from each other by a semiconductor layer. Because of its continuous, parallel combination of heating matrix particles, the heating cable automatically responds to and compensates for fluctuations from the surrounding temperature: in colder places, the plastic between the heating conductors shrinks and restores the current paths - the resistance decreases - more heating takes place. As the surrounding temperature rises, the resistance increases accordingly, causing the heating cable to cool down. Self-regulating heat output adapts individually to each point of the section. So different temperatures will be achieved in the various individual sections, and it always gets the optimum temperature. This also completely eliminates self-overheating, e.g. when the heating cables cross or overlap each other..

You can use the required cable length without affecting the properties. The maximum permitted cable length can be taken from the technical data sheet. Even in case of a possible cable crossing, the performance of this heating cable is basically maintained.

Voltage:	220 / 240 VAC
Dimensions:	(W x H) - 7,7 mm x 5,5 mm
Conductor cross-section:	0,56 mm²
Applied maximum temperature:	+85° C
Maximum Operating Temperature:	+65° C
UV-tolerance:	Yes
Use in potentially explosive areas:	Yes
Specific Power Consumption (at 10°C):	10 W/m
Minimal Bending Radius:	30 mm
Certification:	CE, TÜV Nord
Minimum installation temperature:	-40°C
Max. cut-off length at 10° C on the pipe:	80m
Max. cut-off length at 0° C in the pipe:	58m
IP protection class:	IP 67
Warranty / lifetime:	15 years / min. 30 years