CALORIQUE LTC heating cable 30 W/m self-regulating high quality outer jacket outdoor use

CALORIQUE LTC heating cable 30 W/m self-regulating high quality outer jacket outdoor use

SKU: 7426-002
Category: Self-regulating heating cable - sold by the meter

Self-regulating LTC - heating cable can be optimally used against icing of gutters and roofs of buildings and structures, as well as frost protection and temperature control of pipelines in cold season.

Rated capacity at 10°C

4,79 €

incl. 19% VAT , plus (Standard)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Description

Calorique LTC - Heating cable self-regulating 16-30W/m high quality outer jacket for indoor and outdoor use

Self regulating LTC heating cable is the simplest solution for use on smaller objects where large heating areas or long heating sections are not required. This heating cable can be optimally used against icing of gutters and roofs of buildings and structures, as well as frost protection and temperature control of pipelines in the cold season.

The heating cable has IP protection class 67 and is therefore suitable for temporary submersion in water up to a depth of max. 1m for max. 30 minutes. Permanent use under water is expressly prohibited for this product for safety reasons.

Indoor and Outdoor use:

Gutters
Frost-free running of photovoltaic modules
Pipe trace heating
Optimal solution against condensation
Beheben von Kälte- Wärmebrücken
Temperature control for smaller reservoirs, containers or tanks.

For de-icing large open areas outside and for heating the concrete foundation or concrete screed, we recommend using a different product. In this regard, please contact our customer service. We will be happy to help you.

Advantages:

Self-regulating, no additional thermostat required
Easy installation
Available either per meter or cut to the desired length and ready to plug in
Overlapping with itself is allowed if necessary
Overheating impossible
Moisture and weather resistant
UV-resistant

The heating circuit length is calculated by taking into account the following data:

Nominal voltage 230 watts
Type C circuit breaker with 85% maximum load
Maximum voltage drop 10% on the supply conductor of the heating cable
One-sided connection of the heating cable. The cable is set up on metal pipes with following thermal insulation. Inrush current changes according to the start temperature

When the heating cable is cold started, a current jump happens which can be 6-8 times higher than nominal value - this is normal and can last for several seconds.
Within 4-6 minutes the current reaches the calculated value according to the operating temperature.

Important!

When planning roof deicing systems, it must be taken into account that the calculated specific power of the cable in dew water is up to 2x higher and may deviate from the data sheet.

Voltage:	220 / 240 VAC
Dimensions:	11x7 mm
Conductor cross-section:	0,51 mm²
Maximum Operating Temperature:	+65° C
UV-tolerance:	Yes
Use in potentially explosive areas:	Yes
Specific Power Consumption (at 10°C):	30 W/m
Minimal Bending Radius:	35mm
Certification:	CE, TÜV Nord
Maximum ambient temperature:	+85°C
Minimum installation temperature:	-15°C
Maximum section length at 0 ° C on the roof in condensation / snow:	24m
Maximum section length at 10 ° C as pipeline / use on containers:	30m
Warranty / lifetime:	15 years / min. 30 years