250 lm on drum - CALORIQUE SLL heating cable 16-40W/m self-regulating Premium - outer jacket for indoor and outdoor use
Self-regulating SLL heating cable can be optimally used against icing of gutters and roofs of buildings and structures, as well as frost protection and temperature control of pipelines in the cold season. SLL heating cable can also be used in potentially explosive atmospheres.
The heating cable has IP protection class 67 and is therefore suitable for temporary submersion in water up to max. 1m depth for max. 30 minutes. Permanent use under water is expressly prohibited for this product for safety reasons.
The heating cable consists of two parallel copper wires. The copper wires are separated from each other by a semiconductor layer. Because of its continuous, parallel combination of heating matrix particles, the heating cable automatically responds to fluctuations and compensates them from the surrounding temperature. The plastic shrinks in colder places between the heating conductors and restores the current paths - the resistance decreases - more heating takes place. As the ambient temperature rises, the resistance increases accordingly, cooling the heating cable. Self-regulating heat output adapts individually to each point of the section. In this way, different temperatures are achieved in different individual sections, so always get the optimum temperature. This also completely eliminates self-overheating, e.g. when the heating cables cross or overlap each other.
-
ENERGY SAVING – the heating cable is self-regulating and does not require an additional thermostat. It automatically reacts to fluctuations from the surrounding temperature and compensates them: in colder places is heated more, in warmer less
-
DIVERSE RANGE OF APPLICATIONS- perfectly usable in the iced gutters, for frost-free operation of photovoltaic modules, as pipe trace heating, for compensation of cold or thermal bridges, as well as for prevention of condensation in the indoor rooms
-
HIGH QUALITY INSULATION- Our self-regulating heating cable has a quality jacket and is permanently moisture, weather and UV radiation resistant
-
EASY INSTALLATION - the uninterrupted parallel layout of the cable allows cutting during the installation process
-
HIGH QUALITY AT AN UNBEATABLE PRICE-When purchasing our self-regulating heating cable, our customers receive a 15-year manufacturer's warranty and can count on at least 30 years of carefree maintenance-free use of our high-quality product
Indoor and Outdoor use:
- gutters and roofs
- Frost-free operation of photovoltaic modules
- Pipe trace heating
- Optimal solution against condensation
- Repair of cold and thermal bridges
- Plant heating, Root heating
- Temperature control for reservoirs, containers or tanks
You can use the required cable length without affecting the properties. The maximum permitted cable length can be taken from the technical data sheet. Even in case of a possible cable crossing, the performance of this heating cable is basically maintained.
The heating cable is cut as meter goods.
Important!
When planning roof de-icing systems, it must be taken into account that the calculated specific power of the cable in dew water is up to 2x higher and may be different from the data sheet.
