4 different programs for each day of the week (28 different ranges and temperatures in total): |
Clock programming with 10 minutes accuracy |
Developed: |
to be operated together with heating or air conditioning systems |
Measuring range of temperature: |
0-50°C, resolution from 0.1°C |
Temperature control range: |
5 - 45°C, resolution of 0.2°C |
Hysteresis of 0,5/1,0/2,0/4,0 ° C: |
selectable |
PI: |
system for the optimization of the heating curve |
Sensor calibration: |
from -4.0°C to 4.0°C, step 0.2°C |
Program: |
copy function |
Large: |
clear display with backlighting |
Temporary temperature change: |
the thermostat keeps the preset temperature from now until the next program start |
Vacation mode: |
the controller keeps the set temperature for the desired time, up to 99 days |
Holding the settings |
the possibility to change the temperature is locked. This mode is e.g. for offices, where only one person is authorized to change the temperature |
No heating, that means anti-freeze mode: |
heating mode in which the control keeps the lowest possible but safe temperature (5°C); cooling in the air conditioner stays deactivated |
Operating hours counter for the heating/air-conditioning unit: |
max. 999 hours can be displayed, with a resolution of 1 minute |
Anti-freeze protection: |
the thermostat turns on the heating when the temperature drops below 5°C. This function is always active |
Power supply: |
2 AA alkaline batteries |
Output: |
16 A 230 V AC, 1-pole relay switch |
External temperature sensor: |
NTC 10k at 25°C |
Automatic change: |
between summer and winter time |
Anti-stop system: |
the detachment is switched on once a week for 1 minute |
Dimensions (length/height/width.): |
132,5 x 85 x 27,6 mm |