Heat shrink end cap with internal adhesive

Item number: 6997

EAN: 0618119251994

Adhesive coated, heat shrinkable end cap. Protection of cable ends / unused cables from moisture, fungi and weathering.

Category: Mounting accessories


5,60 €

including 19% VAT. , plus shipping (Standard)

Available now!

Shipping time: 1 - 2 workdays




Heat shrink end cap with internal adhesiveAdhesive-coated, heat-shrinkable end cap which protects and seals cable ends or unused cables easily and practically against environmental influences in the outdoor area. Good chemical and solvent resistance. Thermoplastic coating provides complete seal against moisture, fungi and weathering. Suitable for all standard plastic-insulated cables with a mains voltage of 0.6 - 1 kV.

  • Inner diameter before shrinkage (min): 16.0mm
  • Inner diameter after shrinkage (max): 6.5mm
  • Length (min): 64.0mm
  • Wall thickness (min): 1.0mm
  • For cable diameter 10,0mm to 22,0mm

  • Technical data End cap (coated on the inside with hot melt adhesive):
  • Material: Polyolefin, irradiated (PO-X)
  • Operating temperature: 55 ° C to + 80 ° C.
  • Min. Shrinking temperature: + 135 ° C.
  • Tensile strength: 12 MPa min.
  • Dielectric strength: 15 KV / mm min.
  • Fire protection properties: ASTM D635
  • Color: Black
  • UV-resistant
  • Shrink rate: up to 3: 1
  • Please login first to add a tag.


    Haben Sie Fragen? Rufen Sie unsere Heizungsprofis an + 49 2421-307 20 89