Heat tracing self-regulating heating cable for pipe heating and frost protection

Rohrbegleitung2

A universal self-regulating heating cable can be used in versatile fields of application. This heating cable automatically adjusts its heat output to the change of the ambient temperature. You can use any cable length without changing the properties with no risk of overheating, even with a cable crossing. Of course, there is the possibility for a connection to a frost protection thermostat. The heating cable is very durable. This cable has no UV resistive outer shell and it cannot be used for gutter heating. A tube with a heating tape should be insulated with thermal insulation.

Areas of application:

  • Pipes outdoors and near surface installed pipes;

  • Pipes in buildings and parking garages;

  • Warming of sewage pipes in kitchens to prevent hardening of fat deposits;

  • Heating of pipes for technological processes;

  • Warming of the root zone in greenhouse and early bed.

Self-Regulating effect

Selbstregulierernder Effekt

Technical specifications

  • Operating voltage:

    220 - 240 V

  • Class of protection outer jacket:

    IP67

  • Nominal power at 10 ° C:

    16 W/m

  • Maximum length:

    150 m

  • Minimum bend radius of:

    35 mm

  • Minimum installation temperature:

    -25° C

  • Maximum operating temperature:

    85° C

  • Effective range:

    -45° C … +65° C

  • Operating life:

    20 Year

  • Start current coefficient:

    3,5

  • Measure approximately:

    6 x 11 mm

  • Certification:

    CE

Delivery options

1st Variant

We provide self-regulating heating cable in the length ordered with a connection kit. The heating cable is quickly and easily connected to a mains cable using a terminal set. You can find Ölflex cable for outside areas in our offer. If required, you can also find a freeze protection thermostat in our delivery program

Connection Set

  • Butt connector:

    3 St.

  • Shrink tubing 2/1 mm, L = 37mm:

    1 St.

  • Shrink tubing adhesive 12/4 mm, L = 77mm:

    1 St.

  • Shrink tubing adhesive 18/6 mm, L = 144mm:

    1 St.

  • Shrink end cap with sealing compound:

    1 St.

2nd Variant

The self-regulating heating cable is supplied pre-assembled with an integrated mains plug on 2m cable. The heater is instantly ready to use!

Please contact us if you need a different version. Our employees, with many years of experience in calculations of heating cable required for plastic or metal pipes for all applications, will be happy to advise you.

Selbstregulierendes heizkabel als Rohrbegleitheizung Frostschutz
rohr begleitheizung frostschutz
×
Stay Informed

When you subscribe to the blog, we will send you an e-mail when there are new updates on the site so you wouldn't miss them.

The Dos And Don'ts Of Testing And Tagging Equipmen...
Key Attributes To Look Out For In A Property Manag...